Vescom 3000 Adhesive

The adhesive Vescom 3000 is only suitable for the application of vinyl and textile wallcoverings of + 370 g/m² on permanently sealed (non-breathing) surfaces, e.g. pre-treated or galvanised metal, plastic or painted surfaces. Untreated metal must be pre-treated with a rust inhibitor.

Before the application of Adhesive 3000, it must be thoroughly stirred. Do not thin. Apply with a short nap synthetic wool roller.

Immediately remove adhesive residues with clean water and wipe dry. Do not expose the adhesive to extreme temperature fluctuations. The adhesive Vescom 3000 is frost resistant down to -10 °C.

10 Kgs - Coverage approx. 65 m2 (Coverage may vary depending on substrate and external factors).